Plumbing business owner hands out letters to his crew beside a ute on a Brisbane building site

Christmas Shutdown: The Two Months’ Notice Your Award Requires

The building, plumbing and electrical contracting awards each require two months' written notice to direct annual leave over a Christmas shutdown, so a 24 December close needs notice by about 24 October. What a direction covers, the 2026–27 public holidays by state, and workers short of leave.

Twenty-eight days is a figure you may have seen quoted as the notice for a Christmas shutdown. The three awards that cover building, plumbing and electrical contracting say something different. The building award, the plumbing award and the electrical contracting award each require two months’ written notice before you can direct your crew to take annual leave over the break. For a shutdown that starts on Thursday 24 December 2026, that notice needs to be in their hands by about 24 October.

Each of the three is a modern award. The Fair Work Commission makes these legal instruments under the Fair Work Act 2009. Each one sets the minimum conditions of employment for the employers and employees it covers. So if your crew falls under one, its terms are not optional. In full, the building award is the Building and Construction General On-site Award 2020. The plumbing award is the Plumbing and Fire Sprinklers Award 2020. The electrical award is the Electrical, Electronic and Communications Contracting Award 2020.

Directing the leave is your call as the employer, made in writing. A direction has limits, though, and the public holidays in your state decide how many leave days the break actually uses. Both bite hardest on the apprentice who started in August with three days of leave to their name.

What the three awards say

Start with the award your crew is on. The notice is the same across all three, but the electrical award adds a condition. Shutdowns are in clause 31.3 of the building award. The employer can shut down “all or part of its operation” in conjunction with the Christmas and New Year holidays. It must give two months’ written notice, or a shorter period agreed between the employer and the majority of the employees affected. Anyone you hire after the notice goes out gets it as soon as practicable. For a builder, then, the notice can be a short letter with the shutdown dates, given to everyone it affects.

The plumbing award (clause 24.4) uses the same terms. The electrical award (clause 21.5) does too, with one difference. It applies only where you shut down all of your operation. An electrical contractor who keeps a service van on call over the break may not be running the shutdown the clause describes. Check with the Fair Work Ombudsman or an adviser before relying on a direction in that case.

If your business has an enterprise agreement, its terms apply instead of the award’s, and it can set its own shutdown arrangements, so read that first.

What a direction can cover, and what it cannot

Across all three awards, a shutdown direction has the same limits:

  • It must be in writing and it must be reasonable. The Fair Work Ombudsman’s guidance on directing leave during a shutdown sets out the same test. Section 93(3) of the Fair Work Act allows an award to require leave only if the requirement is reasonable.
  • It can only direct leave the employee has already accrued. You cannot direct someone into negative leave.
  • For any part of the shutdown their accrued leave does not cover, leave without pay needs the employee’s written agreement.
  • Annual leave in advance is possible, but only by agreement (clause 31.4 in the building award, 21.10 in the electrical award).

When a worker is short of leave

That third point is where most of the planning goes. A direction does not let you stand someone down without pay because they are short of leave. The awards do not spell out what happens if a worker has too little leave and will not agree to leave without pay or leave in advance. A shutdown you choose is also not the same as a stand-down, which the Ombudsman describes for stoppages outside the employer’s control. If you have someone in that position, sort it out with them now, or take advice, rather than finding out in the last week of December.

For building employers there is one more option. Clause 16.5 of the building award lets you and an employee agree to bank up to five rostered days off. Banked RDOs can then fill the gap for a worker who is short of annual leave.

The letter itself is the easy part. The question each person on the crew is likely to ask is how many days the break takes off their balance, and that depends on the public holidays below.

Site supervisor writes on a clipboard in a site shed with hard hats hanging on the wall
Two months ahead, the notice is a short letter. In late December, the same gap is a harder conversation.

The public holidays inside a Christmas shutdown

Public holidays that fall during a period of annual leave are not counted as annual leave. That is section 89(1) of the Fair Work Act, and it changes how many days of leave the shutdown actually uses. On the Fair Work Ombudsman’s 2026 and 2027 public holiday lists:

Day Where it is a public holiday
Christmas Eve, Thursday 24 December Part-day only, in the evening: Queensland from 6 pm, NT and SA from 7 pm
Christmas Day, Friday 25 December Everywhere
Saturday 26 December Boxing Day in ACT, NSW, NT, Qld, Vic and WA; Proclamation Day in SA; not a public holiday in Tasmania
Monday 28 December Additional holiday in ACT, NSW, NT, Qld, SA, Vic and WA; Boxing Day in Tasmania
New Year’s Eve, Thursday 31 December Part-day only, from 7 pm, in NT and SA
New Year’s Day, Friday 1 January 2027 Everywhere

An illustration for a Sydney crew, with the site closing after work on Wednesday 23 December and reopening on Monday 11 January. The break covers twelve weekdays. Three of them, 25 and 28 December and 1 January, are public holidays and are paid as public holidays, not taken from leave. That leaves nine days of annual leave: 24, 29, 30 and 31 December and 4 to 8 January. A tradesperson with four weeks’ leave in the bank has plenty. An apprentice who started in August may have fewer than nine days.

Staff not covered by an award

An employee not covered by any award or agreement can still be required to take leave during a shutdown. Section 94 of the Fair Work Act allows it where the requirement is reasonable, and gives a Christmas–New Year shutdown as its example. Award-free usually means a manager whose role sits outside every award classification, or a high-income employee with a written guarantee of earnings. A salary above the award rate is not enough on its own: an office manager on a good salary is often still covered by the Clerks award. The two-month notice in the trade awards does not apply to them, but giving everyone the same notice is simpler.

Before the notice goes out

Put the break into your numbers as well. Every paid leave day and public holiday over it is a day on the payroll with nothing to invoice. So your loaded hourly rate is where the rest of the year pays for it. For the next few weeks, the checklist:

  • Check whether an enterprise agreement applies, and whether it sets its own shutdown dates.
  • Pick the dates, and count the annual leave days they use after taking out your state’s public holidays.
  • Check each worker’s accrued leave against that count, projected to the start of the shutdown.
  • For anyone short, agree in writing what covers the gap: leave in advance, banked RDOs where the building award applies, leave without pay, or work that keeps going.
  • Send the written notice by about 24 October for a 24 December start, and give it to anyone you hire afterwards.
  • If you are an electrical contractor keeping any part of the business running, check how clause 21.5 applies before directing leave.

TWO MONTHS BEFORE THE BREAK

Plan the last fortnight of jobs around the day the gates close.

A shutdown notice fixes the date the crew stops, so the jobs booked into December have to fit before it. SendWork keeps the schedule and each crew member’s assignments in one place, so you can see which jobs finish before the break and which customers need a January date now.

See how Australian tradies schedule their crews →