An electrician in his 40s sits in the open side door of his white van on a new-build housing site on a grey morning, typing on a laptop

Reverse Charge or Normal VAT? How to Invoice a Builder for Construction Work in the UK

Add £600 VAT to a builder's £3,000 invoice, and you'll be sending a credit note and a fresh one. Under the VAT reverse charge for construction, that VAT usually shows on the invoice but stays out of the amount due.

Add £600 VAT to a builder’s £3,000 invoice, and you’ll be sending a credit note and a fresh one. Under the VAT reverse charge for construction, that VAT usually shows on the invoice but stays out of the amount due.

Rewire the ground floor of a terraced house for its owner, the same £3,000 of work, and your invoice does ask for £3,600. Same electrician, same 20% rate, different money in the bank. The difference is HMRC’s VAT domestic reverse charge for building and construction services.

The rule moves the job of accounting for VAT from you to your business customer. The builder pays the VAT to HMRC on its own return, not to you. That is a legal requirement, not an option. The rule rests on section 55A of the Value Added Tax Act 1994 and the Value Added Tax (Section 55A) (Specified Services and Excepted Supplies) Order 2019 (S.I. 2019/892), and it has applied since 1 March 2021.

The electrician who follows is illustrative, and so are his three invoices in a November week. The figures are made up so you can check every sum, and each rule comes from HMRC’s VAT reverse charge technical guide.

When the VAT reverse charge applies to construction work

On Monday the electrician finishes second fix and testing on a rear extension. His customer is the builder, a VAT-registered company that pays him under CIS and has sent no end-user letter.

HMRC’s guidance for suppliers sets the test. You must use the reverse charge if you hold a UK VAT registration, you supply building and construction services, and all five of these hold:

  • your customer has a UK VAT registration;
  • your customer reports its payments to you under the Construction Industry Scheme;
  • the work carries VAT at the standard 20% or the reduced 5% rate;
  • you are not an employment business supplying staff or workers;
  • your customer has not told you in writing that it is an end user or an intermediary supplier.

The builder meets all five. The homeowner at the end of the chain changes nothing: HMRC’s guide says a builder working for a householder still supplies construction services onward, so it is not an end user.

The Construction Industry Scheme (CIS) is HMRC’s system for taking tax from subcontractors’ pay at source. Contractors must operate it under the Finance Act 2004 and the Income Tax (Construction Industry Scheme) Regulations 2005. It runs separately from VAT, and our guide to CIS since April 2026 explains the deductions.

What counts as construction work under the VAT reverse charge

The reverse charge uses the same list of operations as CIS. Building, altering, repairing, demolishing, decorating and scaffolding are on it. So is installing heating, lighting, power supply, drainage, water supply and fire protection, which puts most electrical work squarely inside.

A few jobs fall outside when you supply them on their own. The Order names security systems, including burglar alarms and CCTV, along with delivering materials to site and the professional work of architects and surveyors. So a CCTV-only job for a builder takes normal VAT. Cameras fitted within a single rewiring job count as part of that job.

Labour-only work also counts. In HMRC’s examples, a sub who prices specified work and puts right their own defects supplies construction services. A business that sends workers by the hour on timesheets supplies staff, and staff fall outside.

Checking the builder before you invoice

Check the customer’s VAT number with HMRC’s VAT number checker. HMRC also offers a CIS online check, but warns that some contractors do not show up on it. In that case, ask the builder to confirm that it reports your payments under CIS.

What the VAT reverse charge note on a construction invoice must say

Monday’s invoice reads:

  • Labour, second fix and testing: £2,200.00
  • Materials (cable, accessories, downlights): £800.00
  • Total before VAT: £3,000.00
  • VAT at 20%, for the customer to account for: £600.00
  • Amount due: £3,000.00
  • Note: “Reverse charge: customer to pay the VAT to HMRC”

The materials sit inside the reverse charge as well. Cable and fittings that come with the job form one supply with the labour, so the whole £3,000 goes under it. HMRC adds that splitting one order into a “supply” invoice and a “fix” invoice does not change that.

Regulation 14(1)(o) of the Value Added Tax Regulations 1995 requires the words “reverse charge” on the invoice. HMRC’s guide goes further. The invoice still carries everything a normal VAT invoice needs, including your VAT number and the customer’s name and address. It must make clear that the reverse charge applies and the customer must account for the VAT. HMRC’s sample wordings include “S55A VATA 94 applies” and “Customer to pay the VAT to HMRC”. And it should show the VAT amount but leave it out of the total, or give the rate if your software cannot show the amount.

A subcontract electrician and a main contractor's site manager in hi-vis look over printed paperwork together at a site cabin table, with mugs of tea beside them
The builder pays the £600 to HMRC itself, so the invoice it receives shows the VAT but leaves it out of the amount due.

CIS runs alongside on its own rules. As a CIS-registered sub, he has 20% deducted from the labour only. That takes off £440, and he receives £2,560. The £600 never passes through his bank account.

Wednesday: the same £3,000 of work for a homeowner

On Wednesday he rewires that terraced house’s ground floor, booked directly by the owner. A householder has no VAT registration, so the first condition fails. He raises an ordinary VAT invoice: £3,000 plus £600 VAT, £3,600 due. There is no CIS deduction either, because a homeowner is not a CIS contractor.

HMRC does not expect him to quiz domestic customers. Where your sales are clearly to householders, its guide says you need not check VAT, CIS or end-user status. What decides the VAT is whose invoice it is, not whose house the work is in. Had that homeowner hired a builder who then brought him in, he would be back to Monday’s invoice.

Thursday: a landlord’s end-user letter puts VAT back on

On Thursday he rewires an empty shop unit for a commercial landlord that owns a parade of shops. The landlord has a VAT registration. It also operates CIS, because HMRC treats a business outside construction as a “deemed contractor” once it has spent more than £3 million on construction in a 12-month period. The landlord lets the unit rather than selling construction services on, which makes it an end user. Before the job, its manager emailed him HMRC’s suggested wording:

“We are an end user for the purposes of section 55A VAT Act 1994 reverse charge for building and construction services. Issue us with a normal VAT invoice, with VAT charged at the appropriate rate. We will not account for the reverse charge.”

So Thursday’s invoice is an ordinary VAT invoice. Labour of £1,200 and materials of £300 make £1,500. Add £300 VAT and £1,800 is due, with no reverse-charge note. CIS still applies, so the landlord deducts 20% of the £1,200 labour, £240, and pays £1,560. The letter changes the VAT, not the CIS deduction.

Invoice Before VAT VAT on the invoice Amount due CIS deduction Paid to him
1. Builder, rear extension £3,000 £600 shown, reverse charge £3,000 £440 £2,560
2. Homeowner, ground-floor rewire £3,000 £600 charged £3,600 none £3,600
3. Landlord with end-user letter £1,500 £300 charged £1,800 £240 £1,560

The rules on the end-user letter

End-user status is the customer’s choice. Under the Order, the confirmation must reach you in writing no later than the time of the supply, or sit in a written agreement covering the work. HMRC accepts a letter, an email or a contract term. Keep it with your records, and make sure it says which work it covers. Without one, apply the reverse charge, even if you think the customer qualifies.

An intermediary supplier, such as a landlord passing the work on unchanged to a tenant who is the end user, can send the same letter. HMRC also lets you state in your terms that you will treat customers as end users unless they tell you otherwise.

Mixed jobs, the 5% disregard and zero-rated work

HMRC’s 5% disregard is a narrow exception for single supplies. Where the reverse-charge part is 5% or less of the whole value, normal VAT can apply instead. HMRC’s example is a joiner who builds a staircase off site and fits it for a small part of the price. Both sides must agree it from the start, on the contract values, never invoice by invoice. Where your labour is most of the price, it does not come into play.

Zero-rated work sits outside the VAT reverse charge for construction, because it covers only standard- and reduced-rated services. A subcontractor’s work on new-build houses usually carries the zero rate, as VAT Notice 708 explains. Qualifying energy-saving materials installed in homes have their own zero rate until 31 March 2027, under conditions HMRC sets out in VAT Notice 708/6. Our guide to zero-rate VAT on energy-saving materials covers which installs qualify. Reduced-rated work stays inside, such as renovating a home left empty for more than two years. That invoice shows 5% VAT for the builder to account for.

What changes on your VAT return and in your cash flow

On your own return, you enter the net value of reverse-charge sales and no output VAT on them. The builder does the other half. It adds the £600 to the VAT due on its return and reclaims it as input tax under the normal rules. For a builder that can reclaim all its VAT, the two cancel out.

Your cash flow is where you feel it. You still pay VAT on your van, tools and materials, but builders no longer pay VAT to you. A sub working mostly for builders can end up claiming a repayment from HMRC each quarter. HMRC notes that you can apply for monthly returns through your online VAT account, so the repayments come round faster.

Two VAT schemes work differently with it. You cannot use the Cash Accounting Scheme for reverse-charge sales, though you can keep it for the rest, such as the homeowner’s invoice. On the Flat Rate Scheme, you leave reverse-charge sales out of your flat-rate turnover. HMRC suggests checking whether the scheme still suits you, since it gives no VAT back on materials and overheads; the VAT threshold guide runs that sum.

Late payment is a separate matter again. If a builder sits on the £2,560, you can claim statutory late payment interest from a business customer, whatever the VAT treatment.

Four VAT reverse charge checks before a construction invoice goes out

  1. Is the work on HMRC’s construction list, at 20% or 5%? Zero-rated new-build work, security systems on their own and materials-only deliveries are not.
  2. Is the customer’s VAT number valid, and does it report your payments under CIS?
  3. Do you have an end-user or intermediary letter on file for this job? If you do, use normal VAT.
  4. Does the invoice say “reverse charge”, show the VAT amount or rate, and leave it out of the total?

BUILDER, HOMEOWNER OR END USER?

Know who you are billing before the VAT line goes on.

An invoice raised for the wrong kind of customer means a credit note and a fresh invoice. With SendWork you raise the invoice from the job on your phone, with the customer and the work already attached. The builder’s job and the homeowner’s job stay separate on the way out.

See how invoicing works for UK electricians →